ICI Dulux Pentalite Special Plastic Emulsion Added Fragrance (Acrylic Based) is a premium quality emulsion with a smooth matt finish, which contains fragrance.
New or Bare Surfaces: New or bare surfaces must be clean, dry and free from efflorescent salts. Remove all loose, defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff fibre brush and dust off. Treat any areas affected by mould, lichens, algae and moss with bleach. After priming new surfaces with ICI Dulux Prime On fill the surface with ICI Dulux wall putty. Please refer to PDS of ICI Dulux Prime On and ICI Dulux wall putty for correct application procedure and drying time properties. For best results a single coat of ICI Dulux Prime on over wall putty and dry overnight. Previously Painted Surface: Remove all loose, defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff fibre brush and dust off. Spot prime and fill the surface as describe above if required. Powdery, dusty and cracked surface: Make good minor defects. For larger holes and cracks use sand and cement mixture. Allow the surface to dry. Prime the surface and then fill any surface imperfections with ICI Dulux wall putty. For best results a single coat of ICI Dulux Prime on over wall putty and dry overnight.
Apply 3-4 coats of ICI Dulux Pentalite Emulsion and leave for 3 hours between coats.
Clean all equipment with clean water immediately after use.
Store paint in dry conditions and protect from extreme temperatures.
Do not empty into drains or watercourses. Very toxic to aquatic organisms. Dispose off any paint waste in accordance with the appropriate environment quality regulations.
Keep out of reach of children. Keep away from sources of ignition. In case of fire use foam, dry powder, AFFF or CO2 fire extinguisher. Never use water.Keep container tightly closed and upright to prevent leakage when not in use. Avoid contact with eyes and skin. When applying paint it is advisable to wear eye protection and suitable gloves. In case of contact with eyes rinse immediately with plenty of water keeping eyelids apart and seek medical advice. Remove splashes from skin, use soap and water or a recognized skin cleaner. Work only in areas of good ventilation. Repeated exposure may cause skin dryness or cracking. When using inside, always keep doors and windows fully open during application and drying. A suitable cartridge mask should be worn when rubbing down. Harmful if swallowed; seek medical advice. Dry sanding, flame cutting and or welding of the dry paint film will give rise to dust and or hazardous fumes. Wet sanding should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used. Do not breathe vapour or sanding dust as product is toxic by inhalation. If inhalation causes physical discomfort, move to fresh air. If discomfort persists or any breathing difficulty occurs, seek medical advice and show container label. Care must be taken when transporting paint. Do not store by hanging on a hook. Protect from extreme temperatures. Store in a cool and dry place. In an event of an accident, collect spillage using sand or earth. Do not empty into drains or watercourses as product is very toxic to aquatic organisms and may cause long term adverse effects in the aquatic environment. Dispose off any paint waste in accordance with the appropriate environment quality regulations. Safety Data Sheet available for professional users on request. The container is only for paint use.