ICI Dulux Red Oxide Anti-Corrosion/Rustproof Metal Primer is a solvent-based sealer for exterior and interior metal work.
New or Bare Surfaces: New surfaces must be clean, dry, free from dirt, grease, wax. Surfaces should be thoroughly rubbed down using the suitable abrasive paper and then dusted off. Apply one coat of ICI Dulux Red Oxide Primer and dry overnight. Galvanized and aluminium Surfaces: New galvanized and aluminium surfaces should be cleaned and degreased. Then pre treat with etch primer to ensure good adhesion. Apply one coat of ICI Dulux Red Oxide Primer and dry overnight. Previously Painted Surface: Previously painted surfaces should be thoroughly rubbed down using a suitable abrasive paper and then dusted off.
Apply one coat of ICI Dulux Red Oxide Primer and leave for 16 hours.
Clean all equipment with Mineral turpentine immediately after use
Store paint in dry conditions and protect from extreme temperatures.
Do not empty into drains or watercourses. Very toxic to aquatic organisms. Dispose off any paint waste in accordance with the appropriate environment quality regulations.
Keep out of reach of children. Keep away from sources of ignition as product is flammable. In case of fire use foam, dry powder, AFFF or CO2 fire extinguisher. Never use water. Keep container tightly closed and upright to prevent leakage when not in use. Work only in areas of good ventilation. When using product Inside, always keep doors and windows fully open during application and drying. The product may cause rritation to eyes and skin. Contains METHYL ETHYLY KETOXIME, hence may produce an allergic reaction. When applying paint it is advisable to wear eye protection. In case of contact with eyes rinse immediately with plenty of water keeping eyelids apart and seek medical advice. Repeated exposure may cause skin dryness or cracking. Wear gloves while working. In case of contact with skin, use soap and water or a recognized skin cleaner. Use suitable respiratory equipment while applying paint in narrow spaces. Dry sanding, flame cutting and or welding of the dry paint film will give rise to dust and or hazardous fumes. Wet sanding should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used. In case of insufficient ventilation during spraying wear suitable respiratory equipment, a suitable cartridge mask should be worn provided the filter is changed regularly. All respiratory equipment must meet an appropriate approved standard. Do not breathe vapour or sanding dust. If inhalation causes physical discomfort move to fresh air. If discomfort persists or any breathing difficulty occurs, move to fresh air and seek medical advice by showing container label. Harmful if swallowed seek medical advice immediately. Care must be taken when transporting paint. Keep container tightly closed and upright to prevent leakage when not in use. Store in a cool and dry place. In the event of an accident, collect spillage using sand or earth. Do not empty into drains or watercourses. Very toxic to aquatic organisms. May cause long term adverse effects in the aquatic environment. Dispose of any paint waste in accordance with the appropriate environment quality regulations. Safety Data Sheet available for professional users on request. This container is only for paint use.