ICI Dulux Wall Smoothening Putty (water based) is a ready to use filler that has an excellent whiteness, coverage and application properties.
New or Bare Surfaces: New surfaces must be clean, dry, free from all defective or poorly adhering material. Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff fibre brush and dust off. Treat any area affected by mould, lichens, algae or moss with bleach. After priming new surfaces with ICI Dulux Prime On, dry over night, fill the surface with Dulux Wall Smoothening Putty. Allow the filler to dry for 2-3 hours and apply second coat of Putty. Third coat is not recommended for extra smoothness. ICI Dulux Wall Smoothening Putty can also be applied directly on new unpainted surfaces. Third coat is recommended for extra smoothness. For best results apply one coat of prime-on again over wall putty and dry overnight. Previously Painted Surface: Remove all loose, defective paint and powdery residues by thorough brushing or scraping using a stiff fibre brush and dust off. Smooth surface with ICI Dulux Wall Smoothening Putty as described above if required. Powdry, Dusty and Cracked Surfaces: Make good minor defects. For larger holes and cracks use sand and cement mixture. Allow the surface to dry. Prime the surface and then fill out any imperfections with ICI Dulux Wall Smoothening Putty as described above. Scuff the surface using abrasive paper and dust off.
Apply 1-2 coats of ICI Dulux Wall Smoothening Putty (water based) and leave for 2-3 hours between coats.
Clean all equipment with clean water immediately after use.
Store paint in dry conditions and protect from extreme temperatures.
Do not empty into drains or watercourses. Very toxic to aquatic organisms. Dispose of any paint waste in accordance with the appropriate environment quality regulations
Keep out of reach of children. Keep away from sources of ignition. In case of fire use foam, dry powder, AFFF or CO2 fire extinguisher. Never use water.Keep container tightly closed and upright to prevent leakage when not in use. Avoid contact with eyes and skin. When applying paint it is advisable to wear eye protection and suitable gloves. In case of contact with eyes rinse immediately with plenty of water keeping eyelids apart and seek medical advice. Remove splashes from skin, use soap and water or a recognized skin cleaner. Work only in areas of good ventilation. Repeated exposure may cause skin dryness or cracking. When using inside, always keep doors and windows fully open during application and drying. A suitable cartridge mask should be worn when rubbing down. Harmful if swallowed; seek medical advice. Dry sanding, flame cutting and or welding of the dry paint film will give rise to dust and or hazardous fumes. Wet sanding should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used. Do not breathe vapour or sanding dust as product is toxic by inhalation. If inhalation causes physical discomfort, move to fresh air. If discomfort persists or any breathing difficulty occurs, seek medical advice and show container label. Care must be taken when transporting paint. Do not store by hanging on a hook. Protect from extreme temperatures. Store in a cool and dry place. In an event of an accident, collect spillage using sand or earth. Do not empty into drains or watercourses as product is very toxic to aquatic organisms and may cause long term adverse effects in the aquatic environment. Dispose off any paint waste in accordance with the appropriate environment quality regulations. Safety Data Sheet available for professional users on request. The container is only for paint use.